Zebra MC75 Podręcznik Użytkownika Strona 159

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 158
Maintenance & Troubleshooting 7 - 3
Cleaning
Materials Required
Alcohol wipes
Lens tissue
Cotton tipped applicators
Isopropyl alcohol
Can of compressed air with a tube.
Cleaning the MC75
Housing
Using the alcohol wipes, wipe the housing including keys and in-between keys.
Display
The display can be wiped down with the alcohol wipes, but care should be taken not to allow any pooling of liquid
around the edges of the display. Immediately dried the display with a soft, non-abrasive cloth to prevent streaking.
Scanner Exit Window
Wipe the scanner exit window periodically with a lens tissue or other material suitable for cleaning optical material
such as eyeglasses.
Connector
1. Remove the main battery from mobile computer. See Replacing the Main Battery on page 1-11.
2. Close battery door.
3. Dip the cotton portion of the cotton tipped applicator in isopropyl alcohol.
4. Rub the cotton portion of the cotton tipped applicator back-and-forth across the connector on the bottom of the
MC75. Do not leave any cotton residue on the connector.
5. Repeat at least three times.
6. Use the cotton tipped applicator dipped in alcohol to remove any grease and dirt near the connector area.
7. Use a dry cotton tipped applicator and repeat steps 4 through 6.
CAUTION Always wear eye protection.
Read warning label on compressed air and alcohol product before using.
If you have to use any other solution for medical reasons please contact Motorola for more information.
WARNING! Avoid exposing this product to contact with hot oil or other flammable liquids. If such exposure
occurs, unplug the device and clean the product immediately in accordance with these guidelines.
Przeglądanie stron 158
1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 201 202

Komentarze do niniejszej Instrukcji

Brak uwag