Zebra ZT230 Podręcznik Użytkownika Pobierz pdf (Strona 4)

Preparing the Printer for Use

P1041227-003 ZT210/ZT220/ZT230 Quick Reference Guide 12/08/2011

Preparing the Printer for Use

After you have familiarized yourself with the printer components, prepare the printer for use.

To set up the printer, complete these steps:

1. Select a location for the printer that meets these conditions:

• The surface must be solid and level of sufficient size and strength to hold the printer.

• The area must include enough space for ventilation and for accessing the printer

components and connectors

• The printer should be within a short distance of an appropriate power outlet that is

easily accessible

• The printer must be within range of your WLAN radio (if applicable) or within an

acceptable range for other connectors to reach your data source (usually a computer).

For more information on maximum cable lengths and configuration, refer to the User

Guide.

2. Unpack and inspect the printer. If necessary, report any shipping damage. For more

information, refer to the User Guide.

3. Place the printer in the preselected location.

4. Plug the female end of the A/C power cord into the A/C power connector on the back of

the printer.

Caution • When you are loading media or ribbon, remove all jewelry that could come into

contact with the printhead or other

printer parts.

Caution • Before touching the printhead assembly, discharge any built-up static electricity

by touching the metal

printer frame or by using an anti-static wriststrap and mat.

1 2 3 4 5 6 7 8 9 ... 17 18

Brak uwag

Zebra ZT230 Podręcznik Użytkownika Strona 4