Zebra II Dokumentacja Pobierz pdf (Strona 202)

^LS

Label Shift

Description: The ^LS command allows for compatibility with Z-130 printer formats

that are set for less than full label width. It is used to shift all field positions to the

left so that the same commands used on a Z-130 or Z-220 Printer can be used on

other Zebra printers.

To determine the value for the ^LS command use the following formula.

Z-130 and Z-220 values for ^LHx + ^FOx

(distance from edge of label) = printer value for ^LSa.

If the print position is less than 0, set ^LS to 0.

To be compatible with existing Zebra printers, this command must come before the

first ^FS command. Once you have issued an ^LS command, the setting is retained

until you turn off the printer or send a new ^LS command to the printer.

Format: ^LSa

Parameters:

a = shift left value (in dots)

Accepted Values: -9999 to 9999

Initial Value at Power-up: 0

Comments: When entering positive values, it is not necessary to use the + sign. The

value is assumed to be positive unless preceded by a negative sign.

ZPL II Programming Guide Volume One: Command Reference for X.10

194

1 2 ... 197 198 199 200 201 202 203 204 205 206 207 ... 261 262

Brak uwag

Zebra II Dokumentacja Strona 202